Top 10 PCB Manufacturers in Germany

Choosing a PCB manufacturer in Germany is not just a question of finding a well-known name. A good supplier for one project may be the wrong fit for another if the board needs HDI microvias, rigid-flex construction, controlled impedance, unusual laminates, automotive documentation, PCB assembly, or a production route that can move from prototype to series without surprises.

This guide compares PCB manufacturers and sourcing options that are relevant to German and European buyers. Some companies are German in-house manufacturers. Some combine German engineering support with production partners or group capacity. OrinewPCB is included as a one-stop PCB fabrication and assembly option for buyers who need broad PCB technology support, component sourcing, inspection, and prototype-to-production service.

Use the list as a shortlist builder, not as a final ranking. The practical question is simple: which supplier can prove fit before production starts?

How We Selected These PCB Manufacturers

This list is based on public PCB fabrication or PCB sourcing scope, relevance to German and European buyers, identifiable product or service pages, and fit for common sourcing scenarios such as prototype builds, HDI, rigid-flex, automotive electronics, online ordering, series production, and one-stop PCB assembly.

It is not an independent ranking of global revenue, market share, quality level, or technical superiority. Public website information can help build a shortlist, but the final supplier decision should still be confirmed through RFQ discussion, stackup review, material approval, test requirements, certification scope, production quantity, and lead-time planning.

Best PCB Manufacturers by Buyer Need

Use this table as the first filter before reading each company profile.

Buyer need	Strong shortlist options	Why they fit
One-stop PCB fabrication and PCBA	OrinewPCB	Combines board fabrication, assembly, component sourcing, inspection, and production support
Broad German PCB technology ecosystem	Würth Elektronik CBT	Wide PCB portfolio, German production sites, WEdirekt, prototype-to-series options
High-reliability European PCB manufacturing	KSG GmbH	HDI, rigid-flex, high-frequency, thick copper, IMS, embedded technology, engineering support
German high-tech fab with group scale	Unimicron Germany GmbH	German facility plus access to Unimicron group capacity
Automotive, embedding, and power electronics	Schweizer Electronic AG	Customized PCB technologies, embedded solutions, demanding application focus
Quick-turn prototypes and engineering feedback	CONTAG AG	Berlin production, express PCB service, HDI-SBU, DfM and technical feasibility support
Fine-line, complex HDI, and laboratory support	ILFA GmbH	Microfine structures, HDI, rigid-flex, embedded components, lab analysis
Online PCB prototypes and small series	Beta LAYOUT GmbH	PCB-POOL, online ordering, prototype and small-batch convenience
Online quote plus prototype-to-series route	Leiton GmbH	Online calculation, CAM support, German prototype route, managed series production
Industrial sample-to-series PCB production	Schaltungsdruck Storz	German in-house production, HDI, impedance control, AOI/e-test, industrial series focus

At-a-Glance Comparison of PCB Manufacturers in Germany

Start with capability fit, production route, and quote risk before you compare price.

Company	Public profile	Main capabilities	Buyer advantage	Check before RFQ
OrinewPCB	One-stop PCB and PCBA supplier serving international buyers	PCB fab, HDI, rigid-flex, high-frequency, prototype PCB, assembly, components, testing	Broad manufacturing and assembly support in one workflow	Lead time, logistics, documentation, and production requirements
Würth Elektronik CBT	Large German PCB technology supplier	BASIC, HDI Microvia, STARR.flex, embedding, thermal management, prototypes to series	Broad technology portfolio and lifecycle support	Whether your order runs in Germany or Asia
KSG GmbH	European PCB manufacturer with German and Austrian production	HDI, rigid-flex, high-frequency, thick copper, IMS, embedded technology	Strong engineering and high-reliability positioning	Technology limits, certificates, test documentation
Unimicron Germany GmbH	German high-tech PCB fab in Geldern, part of Unimicron Group	Double-sided, multilayer, HDI, Semiflex, samples to high-volume series	German automation with global group scale	Batch size, production site, qualification transfer
Schweizer Electronic AG	German PCB and embedding technology specialist	Customized PCBs, embedded solutions, power and high-reliability applications	Strong fit for automotive and demanding electronics	Production site, partner route, documentation level
CONTAG AG	Berlin-based quick-turn PCB manufacturer	Express PCBs, HDI-SBU, microvias, IMS, rigid-flex, materials, DfM	Fast engineering feedback and prototype support	Express feasibility and cost impact
ILFA GmbH	Hannover PCB manufacturer for complex boards	HDI, rigid/flex/rigid-flex, 32-layer multilayers, microfine structures, embedded components	Strong fine-line, lab, and engineering support	Feature limits, reports, prototype/series route
Beta LAYOUT GmbH	Online PCB prototype and small-series supplier	PCB-POOL, prototypes, small batches, PCB assembly options	Convenient online ordering and standard specs	Whether the design fits online service limits
Leiton GmbH	Berlin-managed PCB supplier with German prototype route	Prototypes, small/medium series, CAM support, test reports, Asia series route	Online calculation plus technical support	Whether prototype and series routes match
Schaltungsdruck Storz	German industrial PCB manufacturer in Kenzingen	HDI, microvias, impedance control, AOI/e-test, sample-to-series	Stable German production for industrial projects	Quantity, delivery target, Germany/Asia route

1. OrinewPCB

Introduction and business type: OrinewPCB is a PCB fabrication and PCB assembly supplier serving international electronics buyers, including German and European engineering and procurement teams. It is positioned as a one-stop partner for projects that need PCB manufacturing, PCBA, component sourcing, inspection, and production support in one workflow.

Main PCB capabilities: The company covers rigid PCB, multilayer PCB, prototype PCB, HDI PCB, high-frequency PCB, flexible PCB, rigid-flex PCB, aluminum PCB, metal core PCB, heavy copper PCB, and related specialty boards. Its PCB fabrication pages also mention blind vias, buried vias, via-in-pad, impedance control, multiple surface finishes, and testing support.

Strengths for buyers: OrinewPCB’s main advantage is the ability to connect PCB fabrication with PCB assembly, component sourcing, inspection, and production support. That makes it useful when a buyer does not want to manage separate board fabrication, BOM sourcing, assembly, and test suppliers.

Confirm before RFQ: Buyers should confirm lead time, logistics, quality documentation, material requirements, test coverage, assembly requirements, and whether the project needs any origin-specific production condition. For fabrication and assembly planning, OrinewPCB’s PCB FAB and PCB manufacturing capabilities pages are useful starting points.

2. Würth Elektronik Circuit Board Technology

Introduction and business type: Würth Elektronik Circuit Board Technology is one of the most established names in the German PCB market, with a broad portfolio that covers standard and advanced circuit board technologies.

Main PCB capabilities: The company’s PCB portfolio covers standard boards, HDI Microvia, flexible and rigid-flex options, embedding, thermal management, and online ordering through WEdirekt. Würth also describes three German PCB production locations and an Asia production route for large series or price-sensitive common technologies.

Strengths for buyers: Its advantage is breadth. A buyer can discuss prototypes, medium batches, large-volume production, HDI, rigid-flex, thermal management, and embedding within one supplier ecosystem. This is useful for engineering teams that want design support early and a controlled route toward production later.

Confirm before RFQ: Würth is especially relevant for industrial electronics, complex multilayer boards, HDI designs, rigid-flex applications, and projects that benefit from German engineering support. Because the company can also use an Asia production route, buyers should clarify the planned production site, stackup limits, quality documents, and lifecycle support in the quote.

3. KSG GmbH

Introduction and business type: KSG GmbH is a European PCB manufacturer with production in Germany and Austria, and it is well suited to technically demanding PCB projects.

Main PCB capabilities: KSG presents a technology portfolio that includes HDI, multilayer, high-frequency, thick copper, semiflex, rigid-flex, HSMtec, and embedded technology. Its public navigation also shows support topics such as PCB design, layout checks, impedance calculation, stackup calculation, thermal analysis, quality documentation, and long-term or aging tests.

Strengths for buyers: Its advantage is engineering depth. KSG is not only a board supplier; it also supports design and manufacturing checks around impedance, stackup, thermal behavior, reliability, and documentation. That makes it a strong candidate for high-reliability industrial, automotive, sensor, radar, medical, and aerospace-related projects.

Confirm before RFQ: The practical check is to send your expected stackup, via structure, impedance requirements, copper weight, material preference, and reliability class early. A strong supplier should respond with feasible alternatives instead of only quoting your first file set.

4. Unimicron Germany GmbH

Introduction and business type: Unimicron Germany GmbH is a German PCB manufacturer in Geldern and part of the global Unimicron Technology Group.

Main PCB capabilities: The company describes itself as a German manufacturer of customer-specific PCBs headquartered in Geldern. Its German facility produces double-sided boards, multilayer boards, HDI, and Semiflex, and it positions the work for samples, small and medium lots, and large unit quantities. As part of the Unimicron Technology Group, it can also access Asian production capacity.

Strengths for buyers: Its market focus includes automotive, renewable energy, and industrial electronics. The advantage is the combination of a German high-tech fab and access to a larger international group structure.

Confirm before RFQ: Before committing, define your prototype-to-volume bridge. If early builds use one plant and later builds use another, ask how stackup, materials, coupons, process controls, and quality records remain aligned.

5. Schweizer Electronic AG

Introduction and business type: Schweizer Electronic AG is a German PCB and embedding technology company with a strong position in demanding electronics markets.

Main PCB capabilities: Schweizer describes its headquarters in Schramberg, Germany, and highlights high-tech production in Germany and China, plus a broader partner network. Its public site emphasizes customized PCB technologies, embedding solutions, standard to customer-specific boards, and demanding applications.

Strengths for buyers: The company’s strengths include customized PCB technologies, embedded solutions, power electronics, and high-reliability applications. Its target sectors include automotive, industrial, medical, communication, computing, and aerospace.

Confirm before RFQ: The supplier discussion should include technical ownership. Ask who approves the stackup, who owns design-rule feedback, who controls process changes, and what happens when a board moves from development to volume.

6. CONTAG AG

Introduction and business type: CONTAG AG is a Berlin-based PCB manufacturer known for fast prototypes, express services, and a broad set of PCB technologies.

Main PCB capabilities: CONTAG’s public site highlights product categories such as multilayer/basic PCBs, HDI-SBU, IMS and metal core, flexible, rigid-flex, stretchable, 3D-MID, SMD stencils, PCB assembly, and layout. It also presents technologies such as high-frequency and impedance, heat and power, embedding, microvias, materials, surface finishes, quality, DfM, engineering, and technical feasibility.

Strengths for buyers: Its advantage is speed combined with engineering feedback. CONTAG is especially useful when a board is still in development and the team needs quick DfM input, short prototype cycles, and local technical communication.

Confirm before RFQ: The practical check is not just “how fast can you ship?” Ask what they will check before releasing the job: annular rings, microvia design, impedance, material availability, solder mask constraints, surface finish, and electrical test.

7. ILFA GmbH

Introduction and business type: ILFA GmbH is a Hannover-based PCB manufacturer focused on complex, fine-line, high-tech PCB production.

Main PCB capabilities: ILFA describes itself as a German PCB manufacturer headquartered in Hannover. Its public technology page lists rigid, flexible, and rigid-flex PCBs, ultra-thin multilayers, blind and buried vias, HDI, impedance-controlled traces, microfine PCB structures down to 50 micrometers, embedded components, HF and power technology, hybrid material stackups, and multilayers up to 32 layers.

Strengths for buyers: Its strengths include HDI, microfine structures, rigid-flex technology, embedded components, hybrid material stackups, impedance-controlled traces, and laboratory analysis. That makes ILFA a strong candidate when the PCB itself is a technical risk item rather than a simple commodity board.

Confirm before RFQ: Use ILFA-style suppliers when you need evidence, not just delivery. Ask for feasibility review, cross-section expectations, impedance coupon strategy, test reports, and any design-rule changes that reduce failure risk.

8. Beta LAYOUT GmbH

Introduction and business type: Beta LAYOUT GmbH is a well-known online PCB prototype and small-series supplier, especially through its PCB-POOL service.

Main PCB capabilities: Beta LAYOUT’s PCB-POOL service focuses on online ordering, PCB prototypes, small series, and assembly support. Its public page states that PCB-POOL boards are made in Germany, while PCB-OVERSEAS uses Europe and overseas routes depending on the selected service. The site also lists quality management references including ISO 9001, ISO 14001, UL single-layer PCB, UL multilayer PCB, and RoHS.

Strengths for buyers: Its advantage is convenience. Engineers can upload files, select standard specifications, order prototypes or small batches, and add assembly services when the project fits the platform’s rules. It is especially helpful for early engineering loops where speed and predictable online ordering matter.

Confirm before RFQ: Before ordering, check whether your design fits the selected service route. Layer count, material, copper thickness, dimensions, surface finish, and assembly quantity can change whether the board fits the fast online path.

9. Leiton GmbH

Introduction and business type: Leiton GmbH is a Berlin-managed PCB supplier that combines online calculation, German prototype production, and managed series production routes.

Main PCB capabilities: Leiton describes a German main plant for prototypes, small series, and medium series, with production lead times from two working days for certain prototype paths. It also offers Asia-based series routes, managed from Berlin, with German CAM handling, technical support, test equipment, measurement reports, and series-transfer support.

Strengths for buyers: Its capabilities include prototypes, small and medium series, CAM support, measurement reports, technical help, and test services. Its advantage is the balance between online price visibility and human engineering support.

Confirm before RFQ: The key RFQ question is how the first prototype route connects to future production. Ask whether the same stackup, base material, copper thickness, and surface finish can be preserved if the job moves from German prototypes to a cost-optimized series route.

10. Schaltungsdruck Storz

Introduction and business type: Schaltungsdruck Storz is a German PCB manufacturer based in Kenzingen, with a strong focus on industrial PCB production from samples to stable series.

Main PCB capabilities: Storz describes itself as an established German PCB manufacturer with a production site in Kenzingen. Its public production page highlights in-house production across around 6,000 square meters, sample-to-series support, HDI manufacturing, microvia structures, laser-drilled holes, blind and buried vias, plugging, controlled impedance, AOI, electrical testing, process monitoring, and a Germany-plus-audited-Asia production model.

Strengths for buyers: Its capabilities include HDI, microvias, laser drilling, blind and buried vias, plugging, controlled impedance, AOI, electrical testing, and process monitoring. Storz is useful when the project needs stable repeat production more than a one-off prototype.

Confirm before RFQ: Ask where the board will be built at each stage. If samples are made in Germany and volume is produced elsewhere, align your approval documents, test coupons, process controls, and change-control rules from the beginning.

How to Choose Between These German PCB Manufacturers

Match the supplier to the risk in your board: technology risk, origin risk, qualification risk, and scale-up risk.

Project situation	Prioritize this supplier type	Why it matters
Early standard prototype	Online prototype supplier or quick-turn local fab	Speed and convenience matter more than a heavy qualification package
HDI or microvia board	Supplier with proven HDI stackup and laser via process control	Microvia reliability depends on structure, lamination, drilling, plating, and inspection
Rigid-flex product	Supplier with rigid-flex design-rule feedback	Transition areas, bend radius, material stack, and assembly handling can drive failure risk
Automotive or high-reliability industrial PCB	Supplier with clear certifications, traceability, and change control	Documentation can be as important as fabrication capability
Cost-sensitive volume	Supplier with managed Asia or overseas route	Unit cost may improve, but qualification transfer must be controlled
PCBA plus components	One-stop PCB/PCBA supplier	BOM sourcing, assembly testing, and fabrication changes must be coordinated
German-origin requirement	German in-house manufacturer	Contract, compliance, audit, or customer rules may require local production

This is why “top PCB manufacturer” is a weak buying question. A better question is: which supplier can prove that its process fits your board before you issue a purchase order?

Capability Checks Before You Send an RFQ

Before you send files, confirm the factory route, stackup limits, via technology, test plan, and documentation level.

Check	What to ask	Why it matters
Production route	Will this PCB be made in Germany, elsewhere in Europe, China, or another partner site?	Origin affects audits, logistics, qualification, and change control
Stackup	Can you propose or approve a stackup for this impedance, layer count, and material?	Stackup drives impedance, reliability, thickness, and cost
HDI / microvia	What via structure and lamination sequence do you recommend?	Wrong HDI assumptions can cause reliability and yield problems
Trace/space	Can your standard process hold the required minimum line and spacing?	Pushing limits increases cost, lead time, and scrap risk
Copper thickness	What copper weights are feasible with my trace width and spacing?	Heavy copper and fine lines are often conflicting requirements
Materials	Which laminates are available and which alternatives are approved?	Material swaps can affect RF, thermal, and reliability performance
Testing	Will you provide e-test, AOI, impedance coupons, microsections, X-ray, or reports?	Test coverage should match project risk
Documentation	What certificates, inspection records, or first article reports are available?	Quality paperwork must match the customer’s approval process
Assembly support	Can the board be panelized, tested, and packed for assembly?	Fabrication choices affect yield during PCBA

If PCB assembly is part of the sourcing decision, connect fabrication review with assembly review early. A board that is easy to fabricate can still be difficult to assemble if the panel, fiducials, stencil, component package, or inspection plan is weak. For assembly-heavy projects, compare turnkey PCB assembly and fabrication as one supply-chain decision.

What to Prepare for an Accurate PCB Quote

A useful RFQ package includes Gerbers or ODB++, stackup targets, material requirements, surface finish, test needs, quantities, and origin constraints.

RFQ item	Include this detail
Fabrication data	Gerber, ODB++, IPC-2581, drill files, netlist if available
Board basics	Dimensions, layer count, panel or single-board preference
Stackup	Target thickness, impedance, dielectric requirements, copper weights
HDI details	Blind/buried vias, microvia size, via-in-pad, filled vias, sequential lamination expectations
Materials	FR4 grade, high-Tg, halogen-free, Rogers/PTFE, polyimide, IMS, ceramic, or approved alternatives
Surface finish	ENIG, ENEPIG, HASL lead-free, OSP, immersion silver, immersion tin, hard gold
Solder mask / legend	Colors, peelable mask, carbon, special marking requirements
Quantity	Prototype quantity, pilot build, annual forecast, release schedule
Lead time	Standard target, urgent need, launch date, buffer requirements
Testing	E-test, AOI, impedance report, microsection, X-ray, flying probe, ICT or functional test
Documentation	CoC, RoHS/REACH, material certs, inspection reports, first article report
Compliance / origin	German production required, EU origin required, or overseas production accepted
Assembly needs	BOM, pick-and-place, drawings, centroid file, stencil, panelization, packaging

For PCBA quotes, the assembly file set matters just as much as the PCB data. If the board will move from fabrication into assembly, prepare BOM, pick-and-place, assembly drawings, special soldering notes, test requirements, and component sourcing rules. You can also use a dedicated file checklist such as OrinewPCB’s guide to PCB assembly file requirements before sending a formal quote request.

Conclusion: Shortlist by Fit, Not by Name

The right German PCB manufacturer is the one that can prove fit before production, not the one with the longest capability list.

Use OrinewPCB when a project needs one-stop PCB fabrication, assembly, component sourcing, and inspection support. Use the German manufacturers in this list when local production, German engineering support, specialist technology, or qualification control is central to the project. For HDI, rigid-flex, high-frequency, automotive, medical, industrial, or aerospace-related boards, the shortlist should be built around stackup, via structure, material, testing, documentation, quantity, and production route.

Before you choose a supplier, ask each candidate the same questions. Where will the board be built? What is the approved stackup? Which process limits are standard and which are special? What test evidence will be delivered? How will the project move from prototype to production?

If you are preparing a PCB or PCBA project for quotation, start with your files and risk profile. OrinewPCB can review PCB fabrication, assembly, component sourcing, and testing requirements through its PCB FAB and contact paths.

FAQ

Are these PCB manufacturers ranked from best to worst?

No. The list is a sourcing-oriented shortlist, not an independent ranking of market share, capability, or quality. Buyers should compare each manufacturer by project fit, production route, PCB technology, documentation needs, quantity, and lead time.

What services does OrinewPCB provide?

OrinewPCB provides PCB fabrication, PCB assembly, component sourcing, inspection, and related manufacturing support. Its service pages include rigid PCB, HDI PCB, rigid-flex PCB, high-frequency PCB, prototype PCB, multilayer PCB, and turnkey PCB assembly.

When should I choose a German in-house PCB manufacturer?

Choose a German in-house PCB manufacturer when local production, short engineering loops, origin requirements, customer audits, high-reliability documentation, or fast domestic prototype feedback are important.

When does a one-stop PCB and PCBA supplier make sense?

A one-stop supplier can make sense when the project needs PCB fabrication, BOM sourcing, assembly, inspection, and testing to be coordinated together. This is especially useful when the buyer wants fewer handoffs between board fabrication and PCBA production.

What matters most when choosing a PCB manufacturer?

For any PCB manufacturer, check stackup capability, layer count, trace/space, impedance requirements, laminate options, copper thickness, reliability level, testing requirements, production quantity, delivery time, and whether the supplier can support the project from prototype to production.

Should I send the same RFQ to every supplier?

Yes, if you want a fair comparison. Send the same files, quantities, lead-time target, material requirements, testing requirements, and production-origin constraints to each supplier.

What is the biggest mistake in PCB supplier selection?

The biggest mistake is comparing only unit price. A cheaper quote can become expensive if it omits DfM review, test coverage, documentation, logistics, or a stable prototype-to-production route.