What is FR4?

FR4 is a composite made up of woven glass fiber fabric bound together with an epoxy resin adhesive. It ranks among the most widely used substrate materials (i.e., base materials) for printed circuit boards (PCBs). Here, “FR” denotes “flame retardant,” while the “4” represents the material’s classification code for flame-resistant properties.

• Low Tg (130–140°C)
• Standard Tg (150–160°C)
• High Tg (>170°C)

fr4 specifications are set by NEMA (National Electrical Manufacturers Association). Common fr4 PCB NEMA substrate grades are shown in the table below.

Structure and Properties of FR4

What is the use of FR4 in the PCB Industry

1) Primary Insulating Materials

2) Copper Lamination

3) Multilayer PCBs

4) Surface Finishing

Key Benefits and Limitations of FR-4 in PCB Manufacturing

1. Mechanical Strength:FR4 substrates stand out for their strong mechanical strength, a trait that preserves durability and resilience against physical stresses in both manufacturing and application processes.
2. Electrical Insulation:FR4 delivers superior electrical insulation—a trait that helps ward off electrical shorts while ensuring reliable operation of circuits.
3. Low Moisture Absorption: Its low moisture absorption allows FR4 to maintain stable electrical and mechanical properties even in humid environments.
4. Thermal Resistance: FR4 excels at withstanding high temperatures, notably making it suitable for scenarios where heat dissipation is a key requirement.
5. Flame Retardant: FR4 is characterized as a flame-retardant material—it minimizes the risk of fire, which in turn enhances the safety of electronic devices.
6. Cost-Effectiveness: Compared to other high-performance PCB materials, FR4 is relatively cost-effective.

Disadvantages of FR-4

· Higher signal loss at high frequencies

· Lower thermal conductivity

For detailed information about FR4 PCBs, please refer to this article: 《FR4 PCB Material Guide: Properties, Types, and Applications》

Frequently Asked Questions About FR4 PCB

What is the dielectric constant (Dk) of FR4 material?

FR4 typically has a dielectric constant of around 4.2–4.8 at 1 MHz. This property affects signal transmission speed and impedance control, making it an important factor in high-speed and RF designs.

What is the glass transition temperature (Tg) of FR4?

Standard FR4 has a Tg of about 130–140 °C, while high-Tg FR4 options can reach 170–180 °C or higher. Choosing the right Tg ensures PCB stability under high operating temperatures.

Is FR4 suitable for high-frequency circuits?

FR4 works well for most low- and mid-frequency applications. However, for RF or microwave circuits above ~1 GHz, specialized materials like Rogers or PTFE are recommended due to lower dielectric loss.

How does FR4 perform in multilayer PCB designs?

FR4 is widely used for multilayer PCBs (up to 40+ layers). Its insulating properties, mechanical strength, and cost-effectiveness make it a reliable choice for complex stack-ups.

Are FR4 PCBs RoHS compliant and environmentally safe?

Yes. Most modern FR4 laminates areRoHS- and REACH-compliant; halogen-free options are also available, supporting eco-friendly and sustainable electronics manufacturing.

How does PCB material FR4 compare with other PCB substrates?

Compared to high-frequency PCB materials like Rogers or PTFE, FR4 has higher dielectric loss but is far more cost-effective. For most standard applications, FR4 is the go-to option, while specialized materials are chosen for RF or microwave circuits.