Best Rogers PCB Manufacturers in the World (2026 Guide)

If you’ve ever tried to source a Rogers PCB prototype, you already know the frustration. The same five names dominate every search result, datasheets mix up RO4350B with RO4003C, and material traceability varies wildly between suppliers. When you’re building a 77 GHz automotive radar module, a 5G phased-array antenna, or a satellite communications payload, the wrong fabricator can cost you weeks of redesign and thousands in scrapped material.

What to Look for in a Rogers PCB Manufacturer

Rogers laminates are demanding materials at any frequency above 1 GHz, and they become unforgiving above 28 GHz. Dielectric constant tolerance, copper surface roughness, and bonding behavior all swing RF performance, so the fabricator’s process discipline matters far more than its marketing claims. Use these seven criteria when evaluating suppliers:

• Material certifications and traceability. Ask for lot-level Rogers certificates of conformance, not a generic material line on the quote. A serious Rogers shop maintains inventory of common grades (RO4003C, RO4350B, RT/duroid 5880, RO3003) rather than ordering each time on demand.

• Impedance control capability. ±5% is the baseline for commercial 5G and radar work. Better fabs guarantee ±3% with measured TDR reports per panel.

• Hybrid stack-up experience. Most production boards are hybrid constructions: Rogers high-frequency cores bonded to FR-4 prepregs. The fabricator should have documented bond profiles for dissimilar materials and oxide alternative surface treatments to maintain copper adhesion above 10 GHz.

• Certifications. IPC-A-610 Class 3 for high-reliability general work; IPC-6012 Class 3/A for aerospace and space; AS9100D for aviation and defense; ISO 13485 for medical devices; IATF 16949 for automotive radar; ITAR registration for US defense programs.

• Layer count and via technology. Most 5G antenna-in-package and radar designs need HDI, blind/buried vias, and back-drilling. Confirm the fabricator offers these on Rogers laminates, not only on FR-4.

• Lead time honesty. Standard Rogers production turnaround is 8–15 working days for multilayer hybrid stacks at most Asian production fabs and 3–6 weeks at US-domestic AS9100 shops. Any supplier promising under 5 working days on a multilayer Rogers build deserves a follow-up question about expedite fees and material availability.

• Quote responsiveness. US and European buyers usually work business hours in their time zone. A 24-hour quote turnaround with a real engineer’s name attached is a strong signal of process maturity.

 

The 10 Best Rogers PCB Manufacturers in 2026

The list below ranks suppliers by Rogers material breadth, certifications relevant to RF and microwave programs, and recent customer feedback gathered from US and European design teams. Each entry includes one honest limitation to help you match the supplier to your actual program requirements.

1. TTM Technologies

Headquarters: Santa Ana, California, USA | Founded: 1978 | Best for: Aerospace, defense, and satellite RF programs

TTM is the largest North American PCB manufacturer and the default choice for ITAR-controlled radar and aerospace work. Its RF & Specialty Components group operates dedicated production lines for Rogers RO4350B, RO4003C, RT/duroid 5880, RO3003, and over 70 total resin systems. TTM holds AS9100D, ITAR, MIL-PRF-31032, IATF 16949, and ISO 13485 certifications across its facilities. The company’s dedicated Signal Integrity Lab and RF test centers with network analyzers up to 110 GHz make it a strong fit for phased-array antenna boards, T/R modules, and satellite payload PCBs.

The trade-off is cost and access. TTM is structured for large, long-cycle programs. Quote turnaround can stretch past two weeks, minimum order quantities reflect the defense-prime cost base, and prototype-stage customers without an existing program number typically get deprioritized behind volume production accounts.

2. PCBAndAssembly

Headquarters: Shenzhen, China | Founded: 2012 | Best for: Mid-volume Rogers production with comprehensive one-stop PCBA services

PCBAndAssembly is a professional PCB and PCBA manufacturer with over 14 years of experience and 400+ employees across three production facilities. The company runs Rogers materials including RO4003C, RO4350B, and RT/duroid 5880 across 1 to 24 layers, with hybrid Rogers/FR-4 and Rogers/Aluminum constructions, blind/buried vias, and impedance control. ISO 9001, UL, and IPC-A-610 Class 3 certifications are in place, and the company offers a full one-stop service from PCB fabrication through component sourcing, PCB assembly, IC programming, and functional testing — a significant advantage for customers who want to consolidate their supply chain under one quality system rather than manage separate fab and assembly vendors.

Customer feedback highlights PCBAndAssembly’s Rogers material inventory — one UK researcher noted that the company completed a 50-piece Rogers PCB order in just 7 days during a post-Chinese New Year period when most factories were still ramping up. The company’s monthly PCB capacity of 15,000 m² across three facilities, combined with 98.15% on-time delivery, makes it a practical option for mid-volume programs that need competitive pricing without sacrificing quality documentation.

The limitation is that PCBAndAssembly is not ITAR-registered, which disqualifies it for US defense programs that require domestic manufacturing. For commercial 5G infrastructure, RF instrumentation, automotive radar, and IoT module work, it offers a strong balance of capability and cost.

3. Sierra Circuits

Headquarters: Sunnyvale, California, USA | Founded: 1986 | Best for: Quick-turn Rogers prototypes for US design teams

Sierra Circuits is the go-to fabricator for US designers who need a Rogers prototype back in a week without shipping overseas. The shop is AS9100D, ITAR-registered, and MIL-PRF-31032 qualified, with a dedicated high-frequency material line that processes RO4003C, RO4350B, RT/duroid 5880, and RO3003. Sierra offers 24-hour expedited service on simpler Rogers builds and publishes some of the most accurate RF design calculators and stack-up resources available publicly.

Sierra is purpose-built for prototypes and engineering verification builds. Once a design moves into production volumes above a few hundred boards per month, per-unit pricing climbs sharply, and most programs migrate to a higher-volume partner for production.

4. Sanmina Corporation

Headquarters: San Jose, California, USA | Founded: 1980 | Best for: Volume Rogers production for tier-one defense and medical OEMs

Sanmina is a global EMS and PCB manufacturer with plants across the US, Mexico, Israel, and Asia. Its PCB division supports Rogers RO4350B, RO4003C, and RT/duroid 5880 on hybrid stacks, with AS9100D, ITAR, MIL-PRF-31032, ISO 13485, and IATF 16949 across its global facility network. Sanmina provides full vertical integration from PCB fabrication through complex box-build assembly, which appeals to OEMs that want a single supplier managing the entire manufacturing chain.

The company’s onboarding process is built for large, audited programs. Smaller buyers and prototype-stage customers typically struggle to get traction, and minimum order quantities reflect Sanmina’s volume-EMS structure.

5. AT&S

Headquarters: Leoben, Austria | Founded: 1987 | Best for: High-frequency HDI Rogers builds for European automotive radar

AT&S is one of Europe’s largest PCB manufacturers and a major supplier of HDI and substrate-like PCBs for advanced 77 GHz radar and 5G modules. The company runs IATF 16949 and ISO 9001 quality systems and serves tier-one automotive OEMs across Germany and Austria. AT&S has invested heavily in high-frequency material processing, including Rogers-based hybrid stacks for ADAS radar applications.

Capacity is largely committed to large industrial and automotive accounts on multi-year contracts. Smaller US buyers can find quoting cycles slow, and the European cost base makes AT&S a premium option compared with Asian fabricators.

6. Würth Elektronik

Headquarters: Niedernhall, Germany | Founded: 1971 | Best for: European HF and microwave PCBs with strong design support

Würth Elektronik’s Circuit Board Technology division is a well-respected German PCB manufacturer with deep high-frequency expertise. The company offers Rogers RO4350B, RO4003C, and RT/duroid laminates on hybrid stacks, publishes free reference designs for RF applications, and maintains IATF 16949 and ISO 9001 certifications. Würth’s design-in support resources — including impedance libraries, thermal modeling data, and application notes — are among the most thorough available to design engineers.

Würth is priced as a European premium supplier. For US buyers without a strategic reason to source in Germany, total landed cost is typically 50% or more above comparable Asian fabricators, and trans-Atlantic shipping lead times add to the gap.

7. Streamline Circuits

Headquarters: Santa Clara, California, USA | Founded: 1999 | Best for: US-domestic radar and EW programs requiring ITAR

Streamline Circuits focuses on high-mix, high-reliability work for US defense and aerospace customers. The shop is AS9100D, ITAR-registered, and MIL-PRF-31032 qualified. It supports Rogers RO4350B, RO4003C, and RT/duroid 5880, and runs heavy copper and sequential lamination processes in-house. For programs that legally cannot leave US soil, Streamline is a solid fit.

Pricing reflects the US-domestic, defense-focused cost base. Commercial 5G or consumer radar programs without ITAR requirements will pay a significant premium versus comparable Asian or European fabricators.

8. Viasion Technology

Headquarters: Shenzhen, China | Founded: 2009 | Best for: Cost-effective Rogers and PTFE PCBs for mid-volume RF

Viasion is a mid-sized Shenzhen manufacturer with a clear focus on high-frequency and Rogers boards. The company holds ISO 9001:2015, UL (E358677), and RoHS/REACH certifications, supports RO4350B, RO4003C, RO3003, and RT/duroid series materials, and offers reasonable impedance control on hybrid stacks for mid-volume telecom and IoT customers.

Capacity is smaller than tier-one Asian fabricators, so lead times tend to stretch when several large orders arrive simultaneously. For programs that need guaranteed capacity in the 5,000+ panels per month range, Viasion may need to be paired with a second source.

9. PCBWay

Headquarters: Shenzhen, China | Founded: 2004 | Best for: Complex hybrid Rogers stack-ups and prototyping flexibility

PCBWay has grown from a quick-turn prototype shop into a full-service manufacturer capable of up to 64-layer processing with complex high-frequency mix-pressing. The company offers a broad material selection including the full Rogers RO4000 and RT/duroid series, Arlon, Taconic, and Panasonic Megtron laminates. PCBWay supports hybrid constructions, controlled impedance, blind/buried vias, and sequential lamination. Its online quoting system and global distribution network make it accessible to design teams worldwide.

The company’s rapid expansion has sometimes outpaced its quality consistency on complex Rogers builds. Engineering support for hybrid stack-up optimization is thinner than at dedicated high-frequency specialists, so designs that push material boundaries benefit from careful DFM review before production.

10. NCAB Group

Headquarters: Stockholm, Sweden | Founded: 1993 | Best for: Buyers who want a managed Rogers sourcing partner with regional account teams

NCAB Group is a global PCB sourcing company rather than a fabricator itself. It operates a vetted network of partner factories in China and Europe, manages quality audits and on-site inspections, and presents customers with a single point of contact across the US, UK, Germany, and Nordic countries. For procurement teams that want Asian Rogers pricing with a local account manager and quality oversight, NCAB is a workable model.

The broker model means lead times and material allocation depend on partner factory capacity, and added margin sits on top of factory pricing. Direct relationships with the underlying fabricator usually deliver better cost and faster engineering feedback for buyers who have the bandwidth to manage them directly.

 

Quick Comparison Table

Manufacturer	HQ	Best For	Min Order	Lead Time	Key Certifications
TTM Technologies	Santa Ana, USA	Aerospace & defense radar	High (program-based)	3–6 weeks	AS9100D, ITAR, MIL-PRF-31032, IATF 16949
PCBAndAssembly	Shenzhen, China	Mid-volume Rogers with one-stop PCBA	1 prototype	5–12 days	ISO 9001, UL, IPC-A-610 Class 3
Sierra Circuits	Sunnyvale, USA	Quick-turn US prototypes	1 prototype	1–5 days	AS9100D, ITAR, MIL-PRF-31032
Sanmina	San Jose, USA	Volume defense & medical EMS	High (program-based)	4–8 weeks	AS9100D, ITAR, ISO 13485, IATF 16949
AT&S	Leoben, Austria	HDI Rogers for automotive radar	Medium–high	4–8 weeks	IATF 16949, ISO 9001
Würth Elektronik	Niedernhall, Germany	European HF / microwave	Low–medium	2–4 weeks	IATF 16949, ISO 9001
Streamline Circuits	Santa Clara, USA	ITAR radar & EW	Medium	3–6 weeks	AS9100D, ITAR, MIL-PRF-31032
Viasion	Shenzhen, China	Cost-effective RF mid-volume	Low	10–15 days	ISO 9001:2015, UL
PCBWay	Shenzhen, China	Complex hybrid stack-ups	1 prototype	5–12 days	ISO 9001, UL, RoHS
NCAB Group	Stockholm, Sweden	Managed Rogers sourcing	Medium	3–6 weeks	ISO 9001 (network-audited)

 

How to Choose the Right Rogers PCB Manufacturer for Your Project

The right Rogers supplier is rarely the cheapest or the largest. It is the one whose process maturity, certifications, and capacity match the program in front of you.

For ITAR-controlled radar, electronic warfare, or satellite programs, US-domestic fabricators with AS9100D and MIL-PRF-31032 are non-negotiable. TTM, Sanmina, Sierra Circuits, and Streamline Circuits are the realistic short list. Expect 4–8 week lead times and pricing that reflects domestic compliance overhead.

For commercial 5G infrastructure, automotive 77 GHz radar, RF test instrumentation, and high-volume IoT modules where ITAR does not apply, the math tips toward Asian and European specialists. Look for an IPC-A-610 Class 3 shop with documented Rogers process control, hybrid stack-up experience, and an engineering team that responds within 24 hours. PCBAndAssembly, AT&S, Würth Elektronik, Viasion, and PCBWay all fit different points on that spectrum.

Red flags to watch for: vague material certificates that reference “Rogers-equivalent” instead of named grades; fabricators that won’t share TDR impedance reports per panel; quotes that lump Rogers and FR-4 multilayer pricing together without line-item breakdowns; and any supplier that promises a sub-5-day turnaround on a multilayer Rogers hybrid without confirming flying-stock material first.

One practical move: send the same RFQ to three suppliers from different tiers — one US-domestic, one European specialist, and one Asian full-service shop like PCBAndAssembly. The variance in quoted lead times, impedance tolerances, and DFM feedback tells you more about each fabricator than any datasheet.

 

Frequently Asked Questions

Who is the largest Rogers PCB manufacturer in the world?

TTM Technologies is the largest North American PCB manufacturer with significant Rogers and RF/microwave capacity, particularly after its Anaren acquisition. By absolute output, Asian giants like Zhen Ding and Unimicron produce more total PCB area, but their Rogers volume represents a smaller share of overall mix. For Rogers-specific volume tied to defense, satellite, and 5G programs, TTM, Sanmina, and AT&S are the most commonly cited leaders.

How much does a Rogers PCB cost?

Rogers material runs roughly 4–10x the cost of standard FR-4 per square inch, depending on the grade. A 4-layer RO4350B prototype panel typically costs $200–$600 at production fabricators. An 8-layer hybrid Rogers/FR-4 board for radar applications can run $80–$300 per board at mid-volume. The largest cost drivers are material grade (RT/duroid 5880 is the most expensive common grade), layer count, copper weight, and impedance tolerance requirements.

What is the typical lead time for Rogers PCBs?

Standard Rogers production lead times are 8–15 working days for multilayer hybrid stacks at most Asian production fabricators and 3–6 weeks at US-domestic AS9100 shops. Quick-turn prototypes can ship in 5–7 days when the fabricator has the required material in stock. Anything promised in under 5 working days for a multilayer Rogers build should trigger a follow-up question about expedite fees and material availability.

Does PCBAndAssembly handle Rogers PCBs?

Yes. PCBAndAssembly offers Rogers PCB manufacturing across 1 to 24 layers, with materials including RO4003C, RO4350B, and RT/duroid 5880. The company supports hybrid Rogers/FR-4 and Rogers/Aluminum constructions, impedance control, and blind/buried vias. With over 14 years of experience, ISO 9001 and UL certifications, and a monthly PCB capacity of 15,000 m², PCBAndAssembly is a practical option for mid-volume commercial and industrial Rogers programs. Request a quote or DFM review at pcbandassembly.com.

What is the difference between Rogers RO4350B and RT/duroid 5880?

RO4350B is a ceramic-filled hydrocarbon laminate with a dielectric constant near 3.48 ± 0.05 and a dissipation factor of 0.0037 at 10 GHz. It processes similarly to FR-4, which keeps fabrication costs lower. RT/duroid 5880 is a PTFE-based laminate with a dielectric constant near 2.20 ± 0.02 and a dissipation factor of 0.0009 at 10 GHz — far lower loss but significantly more expensive to process. RO4350B is the workhorse for 5G, automotive radar, and most commercial RF designs. RT/duroid 5880 is reserved for ultra-low-loss applications above 20 GHz, satellite links, and high-precision radar systems.

Can Rogers PCBs be manufactured in China?

Yes. Several Chinese fabricators run the full Rogers material stack with lot-level traceability and impedance control comparable to US and European shops. For commercial applications, ITAR restrictions do not apply. For US defense, aerospace, or other controlled programs, the boards must be manufactured at an ITAR-registered US facility regardless of cost. Check program export-control requirements before sourcing internationally.

What certifications should a Rogers PCB supplier have?

The baseline is ISO 9001 plus IPC-A-610 Class 3 workmanship standards. For aerospace and defense, add AS9100D and MIL-PRF-31032. For medical devices, add ISO 13485. For automotive radar at 77 GHz, IATF 16949 is increasingly required by tier-one OEMs. Material certificates should reference the exact Rogers grade and lot number, not a generic line item.

What is the minimum order quantity for Rogers PCBs?

Online Asian fabricators accept one-off prototype orders at panel-share pricing. Mid-volume production typically starts at 25–100 boards per build. US-domestic fabricators often have higher MOQs structured around program contracts, with prototype runs handled through separate quick-turn divisions. PCBAndAssembly accepts orders from a single prototype unit through high-volume production runs.

 

Conclusion

The right Rogers PCB partner depends entirely on what you are building and where it is shipping.

For ITAR-locked radar and defense programs, TTM Technologies is the obvious anchor on the US side, supplemented by Sanmina for volume EMS and Streamline Circuits for mid-size defense contracts. For US-based quick-turn prototypes, Sierra Circuits earns its reputation. For mid-volume Rogers production with full one-stop PCBA services and competitive pricing, PCBAndAssembly covers the broadest range from one-off prototypes through volume production.

Get a custom quote or DFM review from PCBAndAssembly. Whether you need a 2-layer RT/duroid 5880 antenna prototype, an 8-layer hybrid Rogers/FR-4 radar module, or a 5,000-unit 5G infrastructure build, their engineering team reviews every RFQ within one business day. Visit pcbandassembly.com or contact [email protected].